Vertical gardens, or green walls as they are sometimes known, are particularly useful to add decoration to walls, fences and even garden sheds. They also increase the amount of plants that can be grown in a small area - also they are easy to access and maintain.
When combined with an Irrigatia watering kit the main issue that used to be associated with vertical growing is overcome - Irrigatia systems can water up to 5m in height and drippers are attached to the top row of pots, which then filters down through the drainage holes into the pots below, which is then collected in the drainage trough,and collected for easy recycling.
Watering every 3 hours and for longer when sunny - the plants, vegetables and herbs will thrive!
This Irrigatia kit is great for growing decorative plants as well as herbs. It comes with a complete irrigation kit which can be connected to your tap, or preferably use an Irrigatia solar watering kit.
This vertical growing system comprises 12 pots and is a great space saver - an ideal present for someone who has limited space and wants a living wall or green wall.
Attach the support rails in the desired position, position, on a wall, fence or side of a shed. They can also be used in the greenhouse where space is limited.
The pots are easily clipped onto the rails in whatever position you want - the pots allow for a variety of herbs or flowers to be grown. Drippers are placed in the top pots, and water then drips through to the pot below so that everything is adequately watered.
Suggested distances from one rail to the next starting at the top are 20, 20 and 6cm but you may vary this according to circumstances. Ensure the rails are level and vertically one above another. Clip the support brackets to the trough and hang it from the bottom rail. If you want to collect the drainage for use elsewhere in your garden, attach a tube to the trough screw outlet cap and direct it to a container.
- 4 x Support rails 600mm
- 12 x Small Pot & Pot Plate
- 1 x 500mm Trough
- 1 x Trough Outlet
- 1 x Trough End cap
- 1 x Trough Outlet End Cap
- 2 x Trough Bracket
- 10m of 4mm Tubing
- 1 x 0-16L/PHR Adjustable Dripper
- 3 x 4L/PHR Inline Dripper
- 2 x 4mm Tap/Trough Outlet to 4mm Tube
- Screw Cap
- 8 x Screw Anchor
- 8 x 4.8mm/25 Screw
- 1 x PVC Solvent Glue